PK Shopfronts

Guide · Businesses · 4 min read · Updated 17 November 2026

Toughened vs Laminated Glass for Shop Fronts: Which Is Best?

Short answer

Both toughened and laminated glass count as safety glass for shop fronts. Toughened glass is strong and breaks into small blunt pieces, so it is cheaper and safe, but leaves an open hole when broken. Laminated glass holds together on a plastic interlayer when struck, keeping intruders out and the premises secure. For security, laminated glass is the better choice for display windows and doors.

Toughened vs Laminated Glass for Shop Fronts: Which Is Best?

Why shop fronts need safety glass

Shop fronts are full of glass in places where people walk, lean, carry goods and occasionally fall. Under Building Regulations safety glazing guidance, glass in doors, beside doors and at low level is in a critical location and must break safely or resist impact. In practice, almost all glass in a shop front falls into these zones, so ordinary annealed glass is not suitable.

That leaves two main options: toughened glass and laminated glass. Both meet the safety requirement, but they behave very differently when they break, and that difference matters a great deal for security.

How toughened glass works

Toughened glass, sometimes called tempered glass, is ordinary glass that has been heated and rapidly cooled. This puts the surface into compression, making it several times stronger than standard glass of the same thickness. When it does break, it shatters into many small, relatively blunt pieces instead of sharp shards, which reduces the risk of serious injury.

The downside for a shop is that toughened glass breaks completely. Once struck hard enough, the whole pane collapses and leaves an open hole. Toughened glass also cannot be cut or drilled after processing, so each pane must be made to the exact size, which can add a few days to replacement.

How laminated glass works

Laminated glass is made from two or more layers of glass bonded together with a tough plastic interlayer. When it is struck, the glass cracks but the fragments stay stuck to the interlayer, so the pane stays in place. An intruder has to keep hitting the same spot and then cut through the interlayer, which takes time and makes noise.

Laminated glass also offers other benefits. It cuts out most ultraviolet light, which reduces fading of stock in sunny windows, and it gives better sound insulation than toughened glass of similar thickness. Thicker laminates and multiple interlayers give higher levels of attack resistance for high-risk premises such as jewellers and phone shops.

  • Stays in the frame when cracked
  • Slows down smash-and-grab attacks
  • Reduces ultraviolet fading of displayed stock
  • Improves sound insulation
  • Available in higher security grades

Side-by-side comparison

The table summarises the main differences. Many shop fronts use a combination, for example laminated glass in the display windows and entrance door, and toughened glass in higher fanlights that are less exposed to attack.

FactorToughened glassLaminated glass
Safety in critical locationsYesYes
Behaviour when brokenShatters into small piecesCracks but stays in place
Security after impactLeaves an open holePremises stays secure
Relative costLowerHigher
Ultraviolet protectionMinimalGood
Typical shop useFanlights, lower-risk areasDisplay windows, doors

Cost and replacement considerations

Laminated glass costs more than toughened glass of a similar size, and the difference grows with thickness and security grade. Across a full shop front, choosing laminated glass throughout adds to the overall cost, which is one reason many owners use it selectively in the most vulnerable panes. A typical new aluminium shop front costs £4,500–£9,000 for a single unit about five metres wide, with the glass specification one of the main variables.

When it comes to repairs, laminated glass can be safer and cheaper in the short term. A cracked laminated pane keeps the premises secure until a replacement is fitted, which can reduce or avoid emergency boarding costs. Emergency boarding plus a replacement pane typically costs £250–£900 for common sizes.

Thickness, double glazing and other options

Glass thickness depends on the size of the pane and the loads it must withstand. Large display windows need thicker glass than small door panels, and the right thickness for each pane is worked out at the survey based on its dimensions, how it is supported in the frame and its exposure to wind. Typical shop front glazing uses 10mm toughened or around 11.5mm laminated, with thicker specifications for very large panes.

Both toughened and laminated glass can be used in double glazed units, which reduce heat loss and condensation compared with single glazing. A common combination is a laminated inner pane for security with a toughened outer pane for strength. Other options include solar control coatings to keep sunny shops cooler, low-iron glass for clearer displays, and manifestation strips on large panes so people do not walk into them.

  • Thickness chosen to suit pane size and exposure
  • Double glazed units for warmer, quieter premises
  • Solar control coatings for south-facing windows
  • Manifestation markings on large glazed areas

Which should you choose?

If security is a concern, and for most shops it is, laminated glass is the better choice for display windows and entrance doors. It is especially worthwhile for premises selling high-value goods, those with a history of break-ins, and locations where an external shutter is not allowed or not wanted. Combining laminated glass with an internal grille gives strong protection without changing the look of the frontage.

Toughened glass remains a sensible choice for less vulnerable areas, for budget-conscious refits, and where an electric roller shutter already provides the main out-of-hours protection. Your shop front specialist can recommend a mix of glass types based on your stock, location, insurance requirements and budget.

Questions people also ask

Is laminated glass bulletproof?

Standard laminated glass is not bullet resistant. Specialist multi-layer laminates are made for that purpose but are thick, heavy and expensive. Ordinary laminated glass is designed to resist impact and forced entry, not firearms.

Can you tell if shop glass is toughened or laminated?

Safety glass usually has a permanent mark in one corner indicating the type and standard. Looking at the edge can also help: laminated glass shows the layers and interlayer. A glazier can confirm on inspection.

Can laminated glass be double glazed?

Yes. Laminated glass can be used as one or both panes in a double glazed unit, combining security with better thermal performance. This is common in modern shop fronts and commercial entrances.

Written and checked by the PK Shopfronts team. Read our editorial policy.

Get a free shop fronts quote

Tell us what you need and we'll come back with a clear price.

Request a quote