PK Shopfronts

PK Shopfronts

Aluminium Shop Fronts

Made-to-measure aluminium shop fronts with toughened or laminated glazing, stall risers, fascia framing and powder-coated finishes in any RAL colour to match your branding.

Free Shop Fronts quote

No obligation. We only use your details to reply about this job.

Aluminium Shop Fronts — PK Shopfronts

What's involved

Most modern shop fronts are built from extruded aluminium sections because they are strong, slim, weatherproof and quick to install. We design each front around the opening, the stall riser height, the position of the entrance and the fascia above. Glazing is toughened or laminated safety glass, typically 10mm toughened or 11.5mm laminated for display windows, with laminated preferred where security matters. Frames are polyester powder-coated, and you can match a brand colour or pick a traditional dark grey or black. Stall risers can be clad in aluminium panel, tiled or rendered. The survey takes around an hour; fabrication typically takes two to four weeks. On site, the old front is stripped out, the opening checked for level and structural support, and the new framing fixed, glazed and sealed. Most single-unit fronts are installed in one day, with temporary boarding if work runs on.

How we handle it

  1. Tell us about the premises

    Send photos of the frontage, rough measurements and what you need, whether that is a new shop front, a shutter, an urgent repair or a full refit. We give a guide price quickly.

  2. Site survey

    A specialist measures the opening, checks the structure, fascia and stall riser, notes access and power for shutters, and talks through glass, colours, door hardware and security options.

  3. Design and planning check

    We prepare a drawing and itemised quote. If the change needs planning permission or advertisement consent, we flag it so you can apply before anything is manufactured.

  4. Fabrication

    Aluminium framing, glass and shutters are made to the surveyed sizes, typically within two to four weeks. We agree an installation date that suits your trading hours.

  5. Installation and handover

    The team removes the old front or shutter, installs and glazes the new one, completes electrical work and tests everything. Staff are shown how to lock up and operate shutters.

Price guide

Shop front and shutter prices depend on the width and height of the opening, the glass specification, the type of entrance door and the level of security. The guide prices below include supply and installation. Repairs are priced on the parts needed and time on site. Every job is quoted in writing after a survey.

  • Electric roller shutter (up to 3m wide): £1,400–£2,800. Galvanised or powder-coated, with motor, key switch, safety edge and manual override.
  • Aluminium entrance door, replacement: £1,500–£3,200. Single door with closer or floor spring and deadlock, fitted into an existing frame.
  • Aluminium shop front, single unit (about 5m wide): £4,500–£9,000. Includes framing, safety glazing and entrance door. Stall riser cladding and fascia work can add to this.

Questions about aluminium shop fronts

What glass is used in shop fronts?

Shop fronts use safety glass: toughened glass, which breaks into small blunt pieces, or laminated glass, which holds together on an interlayer when struck. Laminated glass is better for security because it resists smash-and-grab attempts. Many fronts use laminated glass in doors and display windows.

Are aluminium shop fronts energy efficient?

Modern thermally broken aluminium sections with double glazed units can significantly reduce heat loss compared with older single-glazed fronts. Many shops still use single glazing for cost and security reasons. A draught lobby or automatic door also helps cut heating bills.

Get a free shop fronts quote

Tell us what you need and we'll come back with a clear price.

Request a quote