PK Shopfronts
Shop Front Entrance Doors
Single and double aluminium entrance doors with floor springs or overhead closers, level thresholds, push bars, deadlocks and optional automatic sliding or swing operation.

What's involved
The entrance door takes more punishment than any other part of a shop front, opening hundreds of times a day. We fit commercial aluminium doors on heavy-duty butt hinges or pivot sets with a floor spring set into the threshold, or with an overhead door closer where a floor spring is not practical. Doors are usually glazed with laminated or toughened safety glass and fitted with a mortice deadlock, hook bolt or electric strike linked to an access control system. A level threshold and an opening width suitable for wheelchairs and pushchairs help meet accessibility requirements. For higher footfall sites, automatic sliding doors with motion sensors, battery backup and safety beams remove the need to push at all. Fitting a replacement door into an existing frame typically takes half a day. Before the visit, empty the area just inside the entrance and plan for the doorway to be out of use for a few hours.
How we handle it
Tell us about the premises
Send photos of the frontage, rough measurements and what you need, whether that is a new shop front, a shutter, an urgent repair or a full refit. We give a guide price quickly.
Site survey
A specialist measures the opening, checks the structure, fascia and stall riser, notes access and power for shutters, and talks through glass, colours, door hardware and security options.
Design and planning check
We prepare a drawing and itemised quote. If the change needs planning permission or advertisement consent, we flag it so you can apply before anything is manufactured.
Fabrication
Aluminium framing, glass and shutters are made to the surveyed sizes, typically within two to four weeks. We agree an installation date that suits your trading hours.
Installation and handover
The team removes the old front or shutter, installs and glazes the new one, completes electrical work and tests everything. Staff are shown how to lock up and operate shutters.
Price guide
Shop front and shutter prices depend on the width and height of the opening, the glass specification, the type of entrance door and the level of security. The guide prices below include supply and installation. Repairs are priced on the parts needed and time on site. Every job is quoted in writing after a survey.
- Emergency boarding and reglazing: £250–£900. Boarding plus replacement toughened or laminated pane. Large or specialist glass costs more.
- Manual roller shutter: from £850. Spring-assisted, suitable for smaller openings. Larger widths and powder-coating increase the price.
- Electric roller shutter (up to 3m wide): £1,400–£2,800. Galvanised or powder-coated, with motor, key switch, safety edge and manual override.
Questions about shop front entrance doors
How much does a new shop front cost in the UK?
A typical single-unit aluminium shop front about five metres wide costs £4,500–£9,000 supplied and fitted, including the entrance door and safety glazing. Larger frontages, laminated security glass, automatic doors, stall riser cladding and fascia work increase the price. A site survey gives a fixed written quote.
Do I need planning permission for a new shop front?
Usually, if the new front materially changes the building's appearance. Like-for-like replacements may not need permission, but changes to materials, layout or the addition of external shutters often do. Listed buildings and conservation areas have stricter controls. Check with the local planning authority before ordering.
How long does it take to install a shop front?
Most single-unit shop fronts are installed in one day, sometimes two for larger frontages or where structural work is needed. Fabrication beforehand usually takes two to four weeks. We schedule installation to suit trading hours and board the opening if work has to continue overnight.
Other services
Aluminium Shop Fronts
Made-to-measure aluminium shop fronts with toughened or laminated glazing, stall risers, fascia framing and powder-coated finishes in any RAL colour to match your branding.
Roller Shutters
Solid, perforated and punched-lath roller shutters, manual or electric, mounted externally or behind the glass, with security locks, safety edges and powder-coated finishes.
Shop Front Repairs and Reglazing
Emergency boarding, reglazing after vandalism or break-ins, replacement floor springs, closers and locks, re-hanging dropped doors and resealing leaking frames.
Shutter Repairs and Servicing
Repairs to jammed, noisy or damaged roller shutters, replacement motors, springs, laths and guide rails, plus planned servicing to keep shutters reliable and safe.
Commercial Entrances and Security Grilles
Automatic doors, glazed lobbies, collapsible security gates and internal grilles for shopping parades, offices, banks, pharmacies and mixed-use buildings.
Shop Front Entrance Doors near you
Get a free shop fronts quote
Tell us what you need and we'll come back with a clear price.
Request a quote