PK Shopfronts

Guide · Businesses · 4 min read · Updated 17 November 2026

Roller Shutter Cost UK: Electric vs Manual Shop Shutters

Short answer

An electric roller shutter for a shop opening up to three metres wide typically costs £1,400–£2,800 fitted, including the motor, key switch, safety edge and manual override. Manual spring-assisted shutters start from £850. Wider openings, powder-coated colours, perforated or insulated curtains and difficult mounting positions increase the price. Repair call-outs start from £120, with parts extra.

Roller Shutter Cost UK: Electric vs Manual Shop Shutters

Roller shutter prices compared

Shutter pricing depends on the size of the opening, the curtain type, how the shutter is operated and where it is mounted. The table gives typical fitted prices for common shop sizes. Larger openings over about four metres may need heavier laths, a stronger barrel and a bigger motor, which pushes the cost up faster than the extra width alone.

Colour adds to the price too. Galvanised steel is the most economical finish, while a powder-coated curtain and box in a colour matching the shop front looks smarter and costs more. Aluminium laths are lighter and do not rust, which suits coastal areas, but are less resistant to forced entry than steel.

Shutter typeTypical fitted priceBest for
Manual, spring-assistedfrom £850Small openings, low daily use
Electric, up to 3m wide£1,400–£2,800Most shops, daily use
Electric, perforated curtainUpper end of electric range or moreDisplay visibility, planning areas
Internal security grilleVaries by sizeConservation areas, period fronts
Repair call-outfrom £120Diagnosis and minor faults

Electric or manual: which should you choose?

Electric shutters are the right choice for most shops. They are quick and easy to operate with a key switch or remote, so staff use them every night without cutting corners. They suit wider openings that would be heavy to lift by hand, and they reduce strain injuries from repeatedly pulling down and pushing up a curtain. Every electric shutter should have a manual override so it can be opened during a power cut.

Manual shutters cost less upfront and have fewer parts to fail. They work well on small openings such as a single door or a narrow window, and for premises where the shutter is used occasionally rather than daily. They rely on springs inside the barrel, which wear over time and need adjusting or replacing.

  • Choose electric for wide openings and daily use
  • Choose manual for small, occasionally used openings
  • Insist on manual override for any electric shutter
  • Consider a remote control if staff lock up alone at night

Solid, perforated, punched or internal?

Solid lath curtains give the highest security and block the view into the shop completely. They are common on industrial units and high-risk premises, but many high streets now discourage them because rows of solid shutters create a dead frontage after hours. Perforated laths have tiny holes that let light through and allow window displays to be seen from outside, which helps the street feel safer and supports planning applications.

Punched-lath shutters have larger openings for a lighter, more open look, with slightly less security. Internal grilles sit behind the glass and are invisible from outside during the day, making them a popular choice in conservation areas and for period shop fronts. Combined with laminated glass, an internal grille gives good protection without changing the appearance of the building.

Planning and safety requirements

Many local planning authorities treat an external roller shutter as a material change to the shop front, requiring planning permission. Some will not approve solid external shutters on main shopping streets at all. Check your council's shop front design guidance and, if in doubt, ask the planning department before you order a shutter that may have to come down.

Powered shutters must also be safe to use. A safety edge on the bottom rail stops and reverses the curtain if it meets an obstruction, and photocells can add another layer of protection. Commercial powered doors and shutters should conform to BS EN 13241, and the safety devices need checking regularly. A competent installer will test these at handover and explain what maintenance is needed.

Common shutter faults and repair costs

Most shutter call-outs come down to a handful of faults. Motors burn out after years of heavy use or if the shutter is operated repeatedly while obstructed. Limit switches drift so the curtain overruns at the top or bottom. Laths get damaged by vehicles, attempted break-ins or the shutter coming down on an obstruction. Guide rails bend and the curtain jams. On manual shutters, springs weaken or snap.

An engineer can often fix minor faults on the first visit from a call-out starting at £120. Replacement motors, springs and individual laths are priced separately depending on the shutter size and make. A full replacement curtain is a bigger job, made to measure. When a shutter is old, damaged in several places and the motor has failed, replacement is often better value than repair.

  • Burnt-out or failed tubular motor
  • Limit switches out of adjustment
  • Damaged or dislodged laths
  • Bent or misaligned guide rails
  • Weak or broken springs on manual shutters

Keeping a shutter reliable

Regular servicing is the cheapest way to avoid a shutter stuck down on a Monday morning. A service every six to twelve months covers cleaning and lubricating the guide rails, checking the barrel, end plates and bearings, testing the motor and limits, inspecting the curtain for damaged laths, and testing the safety edge and manual override. Fixings are tightened and any wear is reported before it causes a breakdown.

Between services, keep the guide rails free from litter and debris, do not hold the switch to force a shutter that is struggling, and never let anyone stand under a moving curtain. If the shutter makes new noises, moves unevenly or stops part way, stop using it and book an engineer before a small fault becomes a large repair.

Questions people also ask

How long does a roller shutter last?

A well-installed, regularly serviced commercial shutter can last many years. Motors and springs are the parts that wear out first and can usually be replaced without changing the whole shutter.

Can an existing manual shutter be converted to electric?

Often, yes. If the curtain, barrel and guide rails are in good condition, a tubular motor can be fitted inside the barrel and a key switch installed. An engineer will check the shutter's condition and size first.

How long does it take to fit a roller shutter?

Shutters are made to measure, usually within two to four weeks. Installation typically takes around half a day per shutter, including electrical connection, testing the safety devices and showing staff how to use it.

Written and checked by the PK Shopfronts team. Read our editorial policy.

Get a free shop fronts quote

Tell us what you need and we'll come back with a clear price.

Request a quote