PK Shopfronts
Shutter Repairs and Servicing
Repairs to jammed, noisy or damaged roller shutters, replacement motors, springs, laths and guide rails, plus planned servicing to keep shutters reliable and safe.

What's involved
Shutters fail at the worst possible times: stuck down when you need to open, or stuck up when you need to lock up. Common faults include a burnt-out or failed tubular motor, a broken spring on manual shutters, laths damaged by a vehicle or a forced entry attempt, bent guide rails, and limit switches that have drifted so the shutter overruns. An engineer diagnoses the fault on site and can often fix it in the same visit, carrying common motors, laths and parts. Larger repairs, such as replacing a full curtain, may need parts made to measure. Regular servicing reduces breakdowns: the engineer cleans and lubricates guide rails, checks the barrel, bearings, motor and limits, tests safety edges and manual override, and tightens fixings. For busy shops, a service every six to twelve months is sensible. Tell us the shutter width, type and whether it is manual or electric when requesting help.
How we handle it
Tell us about the premises
Send photos of the frontage, rough measurements and what you need, whether that is a new shop front, a shutter, an urgent repair or a full refit. We give a guide price quickly.
Site survey
A specialist measures the opening, checks the structure, fascia and stall riser, notes access and power for shutters, and talks through glass, colours, door hardware and security options.
Design and planning check
We prepare a drawing and itemised quote. If the change needs planning permission or advertisement consent, we flag it so you can apply before anything is manufactured.
Fabrication
Aluminium framing, glass and shutters are made to the surveyed sizes, typically within two to four weeks. We agree an installation date that suits your trading hours.
Installation and handover
The team removes the old front or shutter, installs and glazes the new one, completes electrical work and tests everything. Staff are shown how to lock up and operate shutters.
Price guide
Shop front and shutter prices depend on the width and height of the opening, the glass specification, the type of entrance door and the level of security. The guide prices below include supply and installation. Repairs are priced on the parts needed and time on site. Every job is quoted in writing after a survey.
- Emergency boarding and reglazing: £250–£900. Boarding plus replacement toughened or laminated pane. Large or specialist glass costs more.
- Manual roller shutter: from £850. Spring-assisted, suitable for smaller openings. Larger widths and powder-coating increase the price.
- Electric roller shutter (up to 3m wide): £1,400–£2,800. Galvanised or powder-coated, with motor, key switch, safety edge and manual override.
Questions about shutter repairs and servicing
Do I need planning permission for a roller shutter?
Often, yes. Many local planning authorities treat external shutters as a material change to the shop front and require permission. Some refuse solid shutters on high streets and prefer perforated, punched-lath or internal shutters. Check your council's shop front guidance before ordering.
Electric or manual roller shutter: which is better?
Electric shutters are easier to use daily, especially on wider openings, and staff are more likely to use them consistently. Manual shutters cost less and suit small openings with low usage. Electric shutters need a power supply, safety edge and manual override for power cuts.
How often should roller shutters be serviced?
Every six to twelve months is sensible for most shops, more often for shutters used several times a day. Servicing includes cleaning and lubricating guide rails, checking the motor, springs, limits and fixings, and testing safety edges and manual override.
Other services
Aluminium Shop Fronts
Made-to-measure aluminium shop fronts with toughened or laminated glazing, stall risers, fascia framing and powder-coated finishes in any RAL colour to match your branding.
Shop Front Entrance Doors
Single and double aluminium entrance doors with floor springs or overhead closers, level thresholds, push bars, deadlocks and optional automatic sliding or swing operation.
Roller Shutters
Solid, perforated and punched-lath roller shutters, manual or electric, mounted externally or behind the glass, with security locks, safety edges and powder-coated finishes.
Shop Front Repairs and Reglazing
Emergency boarding, reglazing after vandalism or break-ins, replacement floor springs, closers and locks, re-hanging dropped doors and resealing leaking frames.
Commercial Entrances and Security Grilles
Automatic doors, glazed lobbies, collapsible security gates and internal grilles for shopping parades, offices, banks, pharmacies and mixed-use buildings.
Shutter Repairs and Servicing near you
Get a free shop fronts quote
Tell us what you need and we'll come back with a clear price.
Request a quote