PK Shopfronts

Guide · Businesses · 4 min read · Updated 17 November 2026

How Much Does a New Shop Front Cost in the UK?

Short answer

A new aluminium shop front for a typical single unit about five metres wide costs £4,500–£9,000 supplied and fitted, including the entrance door and safety glazing. A replacement aluminium entrance door costs £1,500–£3,200, and an electric roller shutter up to three metres wide costs £1,400–£2,800. Width, glass specification, door type, security level and access are what drive the final price.

How Much Does a New Shop Front Cost in the UK?

Shop front prices at a glance

The guide prices below cover supply and installation, including removal of the existing front or shutter. They assume reasonable access, a sound structural opening and standard working hours. Every shop front is made to measure, so these figures are for budgeting and comparing quotes rather than a fixed price. A site survey confirms the final cost.

The biggest single variable is size. A narrow takeaway frontage with one door and one display pane costs far less than a double-width unit with a central entrance, side lights and a tall fascia. The second biggest is the level of security you want, from standard toughened glass and a deadlock up to laminated glass, internal grilles and an electric shutter.

ItemGuide price (supply and fit)What is included
Aluminium shop front, single unit (about 5m)£4,500–£9,000Framing, safety glazing, entrance door
Replacement aluminium entrance door£1,500–£3,200Door, closer or floor spring, deadlock
Electric roller shutter (up to 3m wide)£1,400–£2,800Motor, key switch, safety edge, override
Manual roller shutterfrom £850Spring-assisted curtain, locks
Emergency boarding and reglazing£250–£900Boarding plus replacement pane
Shutter repair call-outfrom £120Diagnosis and minor repairs, parts extra

What drives the price up or down

Glass makes up a large share of the cost. Toughened safety glass is the standard choice for display windows, while laminated glass costs more but holds together when struck, so a smash-and-grab attempt leaves a cracked pane rather than an open hole. Large single panes need lifting equipment and more fitters, which adds labour. Double glazed units cost more than single glazing but reduce heat loss and condensation.

Entrance hardware is the next factor. A floor spring set into the threshold costs more than an overhead closer but gives a cleaner look and handles heavy use well. Automatic sliding doors with sensors and battery backup add significantly to the price. Electric strikes linked to access control, panic hardware for escape routes and level thresholds for accessibility are also priced individually.

  • Overall width and height of the frontage
  • Toughened versus laminated or double glazed units
  • Floor spring, overhead closer or automatic door
  • Stall riser cladding, fascia framing and signage support
  • Shutter type: manual, electric, solid, perforated or internal grille
  • Out-of-hours work, traffic management or scaffolding

Costs people often forget

A shop front quote that looks cheap may exclude items that turn up on the final invoice. Check whether removal and disposal of the old front is included, along with making good to the brickwork, render and fascia around the new frame. If an electric shutter is part of the job, confirm that the electrical connection by a qualified electrician is included, not just the shutter supply.

Planning permission and advertisement consent are separate costs paid to the local authority, and you may need drawings prepared for the application. If the building above the shop front relies on the old frame for support, a structural engineer may need to specify a new beam. Signage is usually supplied by a sign maker, so make sure the fascia framing is designed to carry it.

Repair or replace?

Not every tired shop front needs replacing. If the aluminium framing is sound, many problems can be solved for a fraction of the cost: a new floor spring or closer for a door that slams, replacement glass for a cracked pane, new seals for leaks, or a respray for faded powder-coating. A repair specialist can assess the front in one visit and tell you honestly whether repair makes sense.

Replacement is usually the better investment when the frame is corroded or out of square, when the layout no longer suits the business, when you need to improve accessibility or security significantly, or when you are rebranding. Replacing the shop front at the same time as fitting a new shutter also saves on separate visits, surveys and making good.

How long it takes and what to expect

After you accept a quote and any planning consent is in place, fabrication typically takes two to four weeks. The installation itself is usually completed in one day for a single unit, sometimes two for wider frontages or where structural work is needed. Work can be scheduled for early morning or a quieter trading day, and temporary boarding keeps the premises secure if installation runs past closing.

On the day, the team strips out the old front, checks the opening is level and properly supported, fixes the new framing, installs the glass and door, seals all joints and tests the locks and closer. If a shutter is being fitted, the electrician connects it and the installer tests the safety edge and manual override before showing your staff how to operate everything.

Getting an accurate quote

You can speed up the quoting process by sending clear photos of the whole frontage from across the street, close-ups of the door and any damage, and rough width and height measurements. Mention whether you want a shutter, whether the building is listed or in a conservation area, and any branding colours. This lets a specialist give a realistic guide price before visiting.

Compare quotes on the same specification: glass type, door hardware, shutter type and finish. A quote that is much lower than others usually uses thinner sections, basic glass or leaves out disposal and making good. Ask for a drawing with the quote so you can see exactly what you are getting.

Questions people also ask

How much does a small shop front cost?

A small frontage, such as a narrow takeaway with one door and one display pane, can come in towards or below the lower end of the £4,500–£9,000 range for a typical single unit. The final cost depends on glass, door hardware and security requirements.

Is laminated glass worth the extra cost for a shop?

For most shops, yes. Laminated glass holds together on its interlayer when struck, making smash-and-grab attacks much harder. It also reduces injury risk and means the premises stays secure until a replacement pane is fitted.

Does a shop front quote include the shutter?

Not always. Shutters are often quoted separately so you can compare options. An electric shutter up to three metres wide typically costs £1,400–£2,800 fitted. Ask for a combined quote if you want both.

Written and checked by the PK Shopfronts team. Read our editorial policy.

Get a free shop fronts quote

Tell us what you need and we'll come back with a clear price.

Request a quote