Perth and Kinross · Scotland
Shop Fronts in Perth
A broken pane or a jammed shutter can cost a Perth business a day's takings; our local repairers aim to get you open quickly.
Perth and the surrounding area
Perth is in the Perth and Kinross council area in Scotland. Jobs here are mostly in the PH1 and PH2 postcode areas. We also take jobs in Scone, Bridge of Earn, Almondbank and Luncarty.
Working in Perth
Parking outside most Perth suburban parades makes installation simpler, with framing and glass unloaded directly at the front. Neighbourhood cafés around Perth increasingly choose folding or sliding fronts that open up fully in warmer weather.
Tenement closes, shared repairs and a wetter climate are typical considerations for work in Scotland's towns and cities. Victorian and Edwardian shop fronts in Perth may have original pilasters, corbels and fascias worth keeping when the glazing is replaced. In Perth, building warrants and planning sit under the Scottish system, so we check local requirements before shop front work starts.
Our services in Perth
Aluminium Shop Fronts
Made-to-measure aluminium shop fronts with toughened or laminated glazing, stall risers, fascia framing and powder-coated finishes in any RAL colour to match your branding.
Commercial Entrances and Security Grilles
Automatic doors, glazed lobbies, collapsible security gates and internal grilles for shopping parades, offices, banks, pharmacies and mixed-use buildings.
Shutter Repairs and Servicing
Repairs to jammed, noisy or damaged roller shutters, replacement motors, springs, laths and guide rails, plus planned servicing to keep shutters reliable and safe.
Shop Front Repairs and Reglazing
Emergency boarding, reglazing after vandalism or break-ins, replacement floor springs, closers and locks, re-hanging dropped doors and resealing leaking frames.
Roller Shutters
Solid, perforated and punched-lath roller shutters, manual or electric, mounted externally or behind the glass, with security locks, safety edges and powder-coated finishes.
Shop Front Entrance Doors
Single and double aluminium entrance doors with floor springs or overhead closers, level thresholds, push bars, deadlocks and optional automatic sliding or swing operation.
Guide prices for Perth
- Shutter repair call-out: from £120. Diagnosis and minor repairs on site. Motors, springs and replacement laths are priced separately.
- Emergency boarding and reglazing: £250–£900. Boarding plus replacement toughened or laminated pane. Large or specialist glass costs more.
- Manual roller shutter: from £850. Spring-assisted, suitable for smaller openings. Larger widths and powder-coating increase the price.
Prices are a guide. Your quote for Perth is a fixed price based on the details you give us. Full price guide.
Shop Fronts questions from Perth
Can you board up my shop in Perth after a break-in?
Yes. We arrange emergency boarding for businesses in Perth and Glenrothes, then measure for replacement glass. Boarding with replacement glazing typically costs £250–£900 depending on pane size and glass type.
How much is a roller shutter in Perth?
An electric roller shutter up to about three metres wide typically costs £1,400–£2,800 fitted, and manual shutters start from £850. Prices in Perth depend on size, curtain type, finish and electrical work rather than location.
Do you install shop fronts in Perth?
Yes. PK Shopfronts designs and installs aluminium shop fronts, entrance doors and roller shutters across Perth and the wider Perth and Kinross area. Send photos and rough measurements, and a local specialist will survey the premises and provide a fixed written quote.
Do you service shop shutters in Perth and across Perth and Kinross?
Yes. We offer planned shutter servicing for businesses in Perth, Glenrothes and across Perth and Kinross, typically every six to twelve months, to reduce breakdowns and keep safety devices working.
How long does it take to install a shop front?
Most single-unit shop fronts are installed in one day, sometimes two for larger frontages or where structural work is needed. Fabrication beforehand usually takes two to four weeks. We schedule installation to suit trading hours and board the opening if work has to continue overnight.
How often should roller shutters be serviced?
Every six to twelve months is sensible for most shops, more often for shutters used several times a day. Servicing includes cleaning and lubricating guide rails, checking the motor, springs, limits and fixings, and testing safety edges and manual override.
Helpful guides
Shop Front Broken After a Break-In? What to Do Next
After a break-in, make sure everyone is safe and report it to the police to get a crime reference number. Photograph the damage, then…
Read the guide →Do You Need Planning Permission for a Shop Front or Shutter?
In most cases, yes. Replacing a shop front with one that materially changes the building's appearance usually needs planning permission,…
Read the guide →Get a free shop fronts quote in Perth
Tell us what you need and we'll come back with a clear price.
Request a quote